Epson TM-L90-i Technical Reference Guide

118
Web Contents Update Settings
You can set how to install and update web contents to register on the TM-L90-i or update them.
See also
"Registering Web Pages" on page 89.
Item Description
Automatic
Update Settings
Automatic Update Sets the method of installing web contents.
When it is enabled, configure other settings in
[Automatic Update Settings].
When it is disabled, install web contents manually.
Frequency Sets the frequency of automatic update for web
contents.
Timing Sets the timing of automatic update for web
contents.
Update Time Sets the start time of automatic update for web
contents.
File URL Specifies the URL for a file to update automatically.
After specifying it, clicking [File Access Test] checks
whether the URL is specified correctly.

Epson TM-L90-i Specifications

General

Type	POS printer
Character size	0.99 x 2.4 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Country of origin	China
Autocutter durability	2 million cuts
Mean time between failures (MTBF)	180000 h
Product color	Gray
Maximum roll diameter	90 mm
USB port	Yes
USB connector	Micro-USB Type-A, Micro-USB Type-B, USB Type-A
USB 2.0 ports quantity	4
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Ethernet LAN data rates	10, 100 Mbit/s
Package depth	300 mm
Package width	190 mm
Package height	240 mm
Package weight	3000 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm