Epson TM-L90-i Technical Reference Guide

Chapter 4 Handling
131
4
Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper
1
Press the cover open lever to open the roll paper cover.
2
Remove the used roll paper core, if any.
WARNING
 Do not open the roll paper cover during printing.
The printer may be damaged.
 Do not touch the manual cutter with your hands when installing or replacing the
roll paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
 Use roll paper that meets the printer specification. For details about paper specification,
see
"Paper Specifications" on page 35.
 Paper must not be pasted to the roll paper spool.

Epson TM-L90-i Specifications

General

Type	POS printer
Character size	0.99 x 2.4 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Country of origin	China
Autocutter durability	2 million cuts
Mean time between failures (MTBF)	180000 h
Product color	Gray
Maximum roll diameter	90 mm
USB port	Yes
USB connector	Micro-USB Type-A, Micro-USB Type-B, USB Type-A
USB 2.0 ports quantity	4
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Ethernet LAN data rates	10, 100 Mbit/s
Package depth	300 mm
Package width	190 mm
Package height	240 mm
Package weight	3000 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm