Epson TM-L90-i Technical Reference Guide

96
Setting the Memory Switches
This printer has memory switches as software switches for making a variety of settings.
Memory switches include 1/2/8 and customized values.
Memory switch settings are made in memory switch setting mode or with the memory switch
setting utility.
Memory Switch 1
Memory Switch 2
 For more information about memory switch setting mode, see "Memory Switch Setting
Mode" on page 128
.
 For more information about the memory switch setting utility, see the Memory Switch
Setting Utility User's Manual.
 For more information about commands, see the "ESC/POS Application Programming
Guide".
SW Function ON OFF
Initial
setting
1-1
Transmit the power ON
information
Transmits Does not transmit OFF
1-2 Capacity of receive buffer 45 bytes 4KB OFF
1-3 Reserved Fixed to ON ON
1-4
Data processing for receiving
error
Ignored Prints "?" OFF
1-5 Automatic line feed Enabled Disabled OFF
1-6 Reserved -- Fixed to Off OFF
1-7 Pin #6: Selection of reset signal Used Not used OFF
1-8 Reserved Fixed to ON ON
SW Function ON OFF
Initial
setting
2-1 Reserved Fixed to On (Do not change the setting) ON
2-2 Autocutter operation Enabled Disabled ON
2-3 to 2-8 Reserved -- -- OFF

Epson TM-L90-i Specifications

General

Type	POS printer
Character size	0.99 x 2.4 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Country of origin	China
Autocutter durability	2 million cuts
Mean time between failures (MTBF)	180000 h
Product color	Gray
Maximum roll diameter	90 mm
USB port	Yes
USB connector	Micro-USB Type-A, Micro-USB Type-B, USB Type-A
USB 2.0 ports quantity	4
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Ethernet LAN data rates	10, 100 Mbit/s
Package depth	300 mm
Package width	190 mm
Package height	240 mm
Package weight	3000 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm