Epson TM-L90-i Technical Reference Guide

Chapter 1 Product Overview
47
1
Printing and Cutting Positions
Lengths of receipts/labels
To prevent paper jams or to make it easier to remove printed receipts/labels, the following
lengths are recommended for printing receipts/labels.
 The values above may vary slightly as a result of paper slack or variations in the paper.
Take this into account when setting the cutting position of the autocutter.
 Partial cuts (a portion of the left edge remains) can be made only on receipt paper with-
out black marks or full-surface label paper without black marks.
 When making a partial cut (leaving a portion of the left edge), do not perform a back
feed.
Use condition Recommended issuing length
Horizontal installation (full cut) 37.5 mm or more
Horizontal installation (partial cut)
25.4 mm or more
Vertical installation
Autocutter blade position
Approx. 29
Approx. 14
Manual-cutter position
Center of the print dotline
Paper feed direction

Epson TM-L90-i Specifications

General

Type	POS printer
Character size	0.99 x 2.4 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Country of origin	China
Autocutter durability	2 million cuts
Mean time between failures (MTBF)	180000 h
Product color	Gray
Maximum roll diameter	90 mm
USB port	Yes
USB connector	Micro-USB Type-A, Micro-USB Type-B, USB Type-A
USB 2.0 ports quantity	4
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Ethernet LAN data rates	10, 100 Mbit/s
Package depth	300 mm
Package width	190 mm
Package height	240 mm
Package weight	3000 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm