Epson TM-L90-i Technical Reference Guide

Chapter 1 Product Overview
41
1
Requirements for die-cut label size (without black marks)
Die-cut labels (without black marks) must satisfy the following requirements.
•Be sure to set the cutting position (L4) to 1.5 mm {0.059"} or more from the label edges at the
top and the bottom.
•Be sure that the distance from the cutting position to the print starting position (=L3-L4) is 2.75
mm {0.108"} or more. And the minimum label length must be 25.4 mm {1"}.
Units: mmFace stock (printing face)
Paper feed
direction
2.8 or more 2.8 or more
Corner R2 or less
37.5±0.5 to 69.5±0.5 or 79.5±0.5
1.5 or more
1.5 or more
1.75±0.5 1.75±0.5
L2=3 to 10
L3
L4
(Label length: 25.4 ~ 101.6)
(Printable area)
Label interval L1:
(Label length +
L2)
Cutting position

Epson TM-L90-i Specifications

General

Type	POS printer
Character size	0.99 x 2.4 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Country of origin	China
Autocutter durability	2 million cuts
Mean time between failures (MTBF)	180000 h
Product color	Gray
Maximum roll diameter	90 mm
USB port	Yes
USB connector	Micro-USB Type-A, Micro-USB Type-B, USB Type-A
USB 2.0 ports quantity	4
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Ethernet LAN data rates	10, 100 Mbit/s
Package depth	300 mm
Package width	190 mm
Package height	240 mm
Package weight	3000 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm