Epson TM-L90-i Technical Reference Guide

98
Selection of the NV graphics memory capacity
Since the NV graphics data memory region and the user NV memory region share the same area,
the capacity that can be set for the NV graphics memory will vary according to the capacity set
for the user NV memory. If a capacity is set that is not possible for the NV graphics memory, the
capacity will be automatically changed to a val
ue that possible.
Selection of the paper width
Select from 38mm to 80mm (in units of 1mm)
Initial setting : 80 mm
Setting the number of head energizing parts
•One-part energizing (initial setting)
•Two-part energizing
•Three-part energizing
•Four-part energizing
NV user memory capacity
NV graphics memory
capacity
1 KB
 None
 64 KB
 128 KB
 192 KB
 256 KB
 320 KB
 384 KB (initial setting)
64 KB
 None
 64 KB
 128 KB
 192 KB
 256 KB
128 KB
 None
 64 KB
 128 KB
192 KB  None
A setting from 71mm to 79mm is not possible.

Epson TM-L90-i Specifications

General

Type	POS printer
Character size	0.99 x 2.4 mm
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Country of origin	China
Autocutter durability	2 million cuts
Mean time between failures (MTBF)	180000 h
Product color	Gray
Maximum roll diameter	90 mm
USB port	Yes
USB connector	Micro-USB Type-A, Micro-USB Type-B, USB Type-A
USB 2.0 ports quantity	4
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Ethernet LAN data rates	10, 100 Mbit/s
Package depth	300 mm
Package width	190 mm
Package height	240 mm
Package weight	3000 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm