Chapter 2 Setup
103
2
Customer Display Settings
Use EPSON TMNet WebConfig to register the dedicated customer display DM-D110, following
the procedures below.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Web serv settings], then [Display].
The "Customor display settings" screen is displayed.
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT’s IP address"/webconfig
The default "TM-DT's IP address" for this product is "192.168.192.168".
To Next Page
Loading...
