Chapter 2 Setup
117
2
Attaching the Power Button Cover
Attach the power button cover that comes with the product onto the power button to prevant
accidental operation of the power button.
Follow the steps below to attach the power button cover.
1
Open the power button cover.
2
Peel off the backing paper.
3
Attach the power button cover as shown in the illustration.
It is recommended to clean the area around the power button with a cloth mistened with
alcohol before you attach the cover.
Be sure to align the inside edge of
the power button cover wit h t h e l e f t
edge of the printer reset button.
Be sure to align the insid e e d g e o f
the power button cover with the
upper edge of the power button.
Printer reset button
Power button
To Next Page
Loading...
