112
Printer Settings
You can register logos in the NV (non volatile) memory area in the printer unit and print them.
Use TM-T70II Utility to register logos.
Register Procedures
Follow the steps below to register logos.
1
Select [Start] - [All Programs] - [EPSON] - [TM-T70II Software] -
[TM-T70II Utility], and starting the TM-T70II Utility.
2
Select [Storing Logos], and then click [Add].
You can also directly print raster format image data as logos without registering them on the
product.
It is recommended to write all logos together in the printer when you register more than one
logo.
To Next Page
Loading...
