Chapter 2 Setup
71
2
Autocutting after closing cover
•Cuts
•Does not cut (initial setting)
Paper reduction
Extra upper space reduction
•Disabled (initial setting)
•Enabled
Extra lower space reduction
Disabled (initial setting)
Enabled
Line space reduction rate
•Not reduced (initial setting)
•25%
•50%
•75%
Line feed reduction rate
•Not reduced (initial setting)
•25%
•50%
•75%
Barcode height reduction rate
•Not reduced (initial setting)
•25%
•50%
•75%
Paper reduction is not performed for space dot lines of graphics printing data.
When reducing barcode height, be sure to check reading a barcode with your barcode
reader in advance.