Chapter 2 Setup
89
2
3
Set the following, then click [Apply].
Support system and startup settings for each service are as follows.
Item Description
Device control Set whether to control POS peripherals using this product or not.
Automatic update of
Web content
Set whether to use the automatic update for Web content or not.
Server direct print Set whether to use the server direct print or not.
Status notification Set whether to use the status notification or not.
System
Device
control
Automatic
update of Web
content
Server direct
print
Status
notification
ePOS-Device API On (default) Off / On Off / On Off / On
ePOS-Device XML On (default) Off / On Off / On Off / On
Server Direct Print On (default) Off / On On Off / On
To Next Page
Loading...
