114
Handling
This chapter describes basic handling of the product.
Installing and Replacing Roll Paper
1
Use the cover open lever to open the roll paper cover.
2
Remove the used roll paper core, if any.
WARNING
• Do not open the roll paper cover during printing.
The product may be damaged.
• Do not touch the manual cutter with your hands when installing or replacing the roll
paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
• Use roll paper that meets the product specification. For details about paper specification, see
"Paper Specifications" on page 126.
• Paper must not be pasted to the roll paper core.
When the roll paper cover cannot be opened, see "Removing Jammed Paper" on page
116.