Epson TM-T83II

121
Appendix
Printing Specifications
dpi: dots per inch
*: When printing with the default print density level at 24V and 25°C {77°F}.
80 mm width paper printing 58 mm width paper printing
Printing method Thermal line printing
Dot density 180 × 180 dpi
Printing direction Unidirectional with friction feed (Reverse feed is not
supported.)
Printing width 72.0 mm {2.83"}, 512 dots 50.8 mm {2"}, 360 dots
Characters per line Font A: 42
Font B: 56
kanji font A: 21
Kanji font B: 32
Font A: 30
Font B: 40
kanji font A: 15
Kanji font B: 23
Maximum print speed * 200 mm/s {7.87"/s}
Line spacing 4.23 mm {1/6"} (initial setting, programmable by command)