Epson TM-T83II

46
Functions
Receive buffer capacity
•4KB (initial setting)
•45 bytes
Processing when data receive error
•Prints “?” (initial setting)
•Ignored
BUSY condition
•Receive buffer full/Offline
•Receive buffer full (initial setting)
Auto line feed
•Always enabled
•Always disabled (initial setting)
USB power-saving function
•Disabled
•Enabled (initial setting)
Release condition of receive buffer BUSY
• Releases when the remaining receive buffer capacity becomes 256 bytes (initial setting)
• Releases when the remaining receive buffer capacity becomes 138 bytes
No settings are required.
Do not change the settings.
No settings are required.
This function is enabled only when Receive buffer capacity is set to 4KB.