118
Appendix
Product Specifications
Printing method Thermal line printing
Cutting method Partial cut (cutting with one point in left edge left uncut)
Interfaces USB host port • Standards: USB2.0 (High/Full/Low speed)
• No. of ports: 2 ports
• Connector: Type A
USB device port • Standards: USB2.0 (High/Full/Low speed)
• No. of ports: 1 port
• Connector: Type B
Serial • Flow control: XON/XOFF control or DTR/DSR control
• Baud late: Maximum 115200 bps (bps: bits per second)
• Parity: Odd, Even, None
• Connector: D-sub 9 pin (Male)
microSD card • No. of slots: 1 slot
• Connector:
Make sure that the product power is turned off before
inserting or removing a microSD card.
Use a microSD card with wear leveling.
Ethernet 10Base-T/100Base-TX
Drawer kick • Pin: 6 pin
• Connector: Modular
(only for cash drawer or external optional buzzer)
Buffers Receive buffer 4 KB/45 bytes
Downloaded buffer 12 KB (downloaded images)
NV graphics data 256 KB
Barcode/two-dimensional symbol/
printing
JAN 8 (EAN 8), JAN 13 (EAN 13),UPC-A, UPC-E,CODE 39,ITF,
CODABAR (NW-7),CODE 93,CODE 128,PDF417, QR CODE,
MaxiCode, GS1-128, GS1 DataBar Omnidirectional,
GS1 DataBar Truncated, GS1 DataBar Stacked,
GS1 DataBar Stacked Omnidirectional, GS1 DataBar Limited,
GS1 DataBar Expanded, GS1 DataBar Expanded Stacked,
Composite Symbology
Power supply AC adapter (Model: PS-180)
To Next Page
Loading...
Need help?
General