35
Chapter 2 Setup
2
Connecting the Product to the Network
For Wired LAN connection
Connect the product to a network by a LAN cable via a hub.
Insert a 10BASE-T/100BASE-TX LAN cable into the LAN connector until it clicks.
CAUTION
• When LAN cables are installed outdoors, make sure devices without proper surge
protection are cushioned by being connected through devices that do have surge
protection.
Otherwise, the devices can be damaged by lightning.
• Never attempt to connect the customer display cable, drawer kick cable, or a standard
telephone line cable to the LAN connector.
To Next Page
Loading...
