Epson TM-T83II

17
Chapter 1 Product Overview
1
Status LED
With the status LED on the rear of the product, you can check the interface board status.
Wired LAN Status LED
With the Wired LAN Status LED on the rear of the product, you can check the communication status
of the product.
LED Description
On (Green) Operating normally.
On (Orange) Starting up.
If the status LED is on in orange even after 30 seconds have passed since the
printer is turned on, repair is required.
Off Power is not turned on.
If the status LED is off even if the printer is turned on, repair is required.
LED Description
Green On: Link established
Flashing: Transmitting/receiving data
Off: Link not established
Yellow On: 100BASE-TX
Off: 10BASE-T
Status LED
LED (Green)
LED (Yellow)