Epson TM-T88V-i

84
addFeedPosition method
Adds label/black mark paper feeding to the command buffer. (Supported in firmware Ver.2.1 and later)
Syntax
addFeedPosition(pos);
Parameter
 pos:(Requiredparameter,Objecttype:String)
Specifiesthefeedposition.
Return value
Exception
• Controloflabelpaper/blackmarkpapermustbedoneinthestandardmode.
•Inthepagemode,addFeedPositionmethodspecificationcannotbeused.
Setting Description
FEED_PEELING Feeds to the peeling position.
FEED_CUTTING Feeds to the cutting position.
FEED_CURRENT_TOF Feeds to the top of the current label.
FEED_NEXT_TOF Feeds to the top of the next label.
Return value Object type
ePOS-Print Builder Object ePOS Builder
Exception Object type
Parameter " ... " is invalid Error