Epson TM-T88V-i

42
Programming Flow
For the ePOS-Print API, programming is performed based on the following work flow:
•ePOS‐PrintsupportedTMprinterchecksthestatusoftheTMprintertobeusedforprinting
andthenstartsprintingoperation.(infirmwareVer.1.2andlater)
•AstatuseventhelpscheckthestatusoftheTMprinter.Fordetailsontheprocedure,referto
ReceptionofStatusEvent(p.51
).(infirmwareVer.1.2andlater)
1. Embedding of ePOS-Print API (p.43)
2. Print Document Creation (p.44)
❏ To create a text print document: (p.45)
❏ To create a graphic print document: (p.46)
❏ To create a page mode print document (p.47)
4. Reception of Print Result (p.49)
3. Transmission of Print Document (p.48)