Epson TM-T88V-i

239
Appendix
Paper setting function of TM-L90
Setting Paper Width
It sets the paper width with memory switch setting mode.
1
Turn the printer's power off and set the receipt paper.
2
While the cover is opened, turn the power on while pressing the FEED button.
3
After confirming the ERROR LED lights up, press the FEED button twice and close
the cover.
4
Select the paper width according to the operation method to be printed.
Automatic setting of paper layout
1
Turn the printer's power off and set the paper.
2
While the cover is opened, turn the power on while pressing the FEED button.
3
After confirming the ERROR LED lights up, press the FEED button 6 times and close
the cover.
IncaseofTM‐L90‐i,keeppressingtheFEEDbuttonaftertheERRORLEDgetsturnedoffonce
andlightsupagain.