Epson TM-U295

REVISION SHEET
Sheet 6 of 10
REV. SHEET CHANGED CONTENTS DATE
all sheets
Sheet title
TM-295 ® TM-295/295P (Change)
Application
Apply to TM-295 (Standard Specification). ® Apply to TM-295
(Standard Specification) (RS-232 serial interface specification) or to
TM-295P (IEEE 1284 bidirectional parallel interface specification).
(Change)
I
Features
Either RS-232 Serial Interface or IEEE 1284 bidirectional parallel
interface should be selectable when the product is shipped from the
factory. (Addition)
II - VI
Table of contents (Change)
6
Applied Standards
Applied standards were changed. Also applied safety and EMI
standards are described in this section while they were mentioned in
the separated sections on last revision. (Change)
2.1.2 IEEE 1284 bidirectional parallel interface
(Addition)
11-1
½
11-6
2.1.3 Reception of status from the printer through the bidirectional
parallel interface (Addition)
12
2.2 Connectors
Figure 2.2.2 (Addition)
3.1.2 Command list
CR command (Addition)
15
ESC c 3 command (Addition)
22
DIP switch settings for parallel interface (Addition)
25
3.6.1 Mechanical errors
Descriptions for parallel interface mode (Addition)
31-2 Figure 4.4.2 (Addition)
32
5.2 Option
Power supply unit safety standard CSA ® C-UL (Change)
D
35 CR command details (Addition)
TITLE
TM-U295/U295P
Specification
(STANDARD)