Epson vs 230 - Page 67

67
Projector name Displays the name that has been registered to the projector.
Icons Displays the icons registered for the projector or group. You can change
icons using the Select button.
Group name Displays the group name that the projector belongs to. You can change the
group using the Select button.
IP address Displays the projector's IP address.
Light source hours
used
Displays the number of hours the projector's light source has been used.
Source Displays the projector's current input source. When you select a non-Epson
projector, you can specify the number of the input source to switch sources.
Light Source Displays projector's light source.
Constant Brightness
Remains
Displays the remaining time that the projector can maintain constant
brightness. (Available only when Constant Brightness is set to On in the
projector's light source setting menu.)
Temperature level Displays the projector's temperature in five levels.
Manufacturer Displays the projector's manufacturer.
Model Displays the projector's model name.
Description Displays notes about the projector.
Status Displays the projector's error information. To view solution, move the pointer
over the error information.
Password If computer/projector authentication fails and you have set a password for the
projector, enter your password here to access the projector settings.
Parent topic: Projector Properties Screen
Downloaded from ManualsNet.com search engine