44
Open the Tool menu, and then select Application lock.
The application is locked and no operations are available except for opening and closing the application
and disabling the application lock.
To unlock the application, open the Tool menu, and then select Application unlock. If no password has
been set, you can leave these fields blank and just click OK in the window to enter the password.
Parent topic: Making Security Settings
Sending Email Notifications
You can configure the software to send you an email alert if there is a problem with the projector or the
software detects that the registered projector has been replaced with a different one. The software can
also send you a notification email when the projector returns to normal status.
Note:
• If a critical problem causes a projector to shut down, you may not receive an email alert.
• The type of problems included in the email notification vary depending on your projector.
1. Select Tool from the menu bar and select Environment setup.
2. Select the Mail tab.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
