34
Not all menu settings are copied to another projector, such as following.
• Network menu settings (except for the Mail menu and the Others menu)
• Lamp Hours and Status from the Info menu
Note: Perform the batch setup operation before adjusting the image settings such as Keystone. Image
adjustment values are also applied to other projectors and adjustments you made before performing the
batch setup operation are overwritten.
When you copy the menu settings from one projector to another, the user's logo is also copied. Do not
register any information that you do not want to share between multiple projectors as a user's logo.
Caution:
• You cannot use the projector while copying projector menu settings in a batch.
• Do not unplug the projector's power cord while copying the menu settings. If the projector
unexpectedly shuts down while copying, the configuration may not be written correctly, which could
cause the projector to malfunction. Epson takes no responsibility for batch setup failures and
associated repair costs due to power outages, communication errors, or other problems that may
cause such failures.
Downloading a Projector Configuration File
Copying a Projector Configuration File
Parent topic: Updating Firmware and Copying Menu Settings
Downloading a Projector Configuration File
You can download a configuration file containing the menu settings from a projector so you can copy
them to another projector.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
