Epson vs 230 - Pjlink Monitoring and Control Limitations; Notices

81
PJLink Monitoring and Control Limitations
The following features are not available when you monitor or control the projector using the PJLink.
• Automatic search (for PJLink Class1 projectors)
• Source button on the main screen
• Schedule
• Email Notification
• Message Broadcasting
• Log Save Settings (except for Projector Info)
• Firmware update
• Menu settings copying
• Detecting replacement of registered projectors
The following information cannot be acquired from non-Epson projectors.
• Light source hours used
• Constant Brightness Remains
• Temperature level
• Status History
• Usage History
• Status Information
• Service
• Temperature history
Parent topic: Appendix
Notices
Check these sections for important notices about your software.
Copyright Notice
About Notations
General Notice
Copyright Attribution
Parent topic: Appendix
Downloaded from ManualsNet.com search engine