144
Faxing Problems
Faksu sūtīšanas
problēmas
Faksogramų
siuntimo ir priėmimo
problemos
Faksimisega seotud
probleemid
Problems Solution No.
Cannot send fax.
ABCDEIJ
Cannot receive fax.
ABCFIJ
Quality problems (sending)
GHJ
Quality problems (receiving)
J
Answering machine cannot answer to voice calls
K
Incorrect time
L
Solutions
A
Make sure the phone cable you are using is correct for the product. See the fax specications in the Appendix of the online
User’s Guide.
B
Make sure the phone cable is connected correctly and check that the phone line works. You can check the line status by using
the Check Fax Connection function. R & 66
C
If you connected the product to a DSL phone line, you must install a DSL lter on the line otherwise you cannot fax. Contact
your DSL provider for the necessary lter.
D
If you connected this product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, turn o Dial Tone
Detection. R & 94
E
Make sure that the recipient’s fax machine is turned on and working.
F
If this product is not connected to a phone and you want to receive faxes automatically, make sure you turn on auto answer.
R & 86
G
Clean the document glass and Automatic Document Feeder (ADF). See your online User’s Guide.
H
If the fax you sent was faint or not clear, change the Resolution or Contrast in the fax settings menu. R & 94
I
Turn o V.34. R & 94
J
Make sure that ECM is turned on. R & 94
K
When auto answer is turned on and an answering machine is connected to the same phone line as this product, set the
number of rings to answer for receiving faxes to a higher number than the number of rings for the answering machine.
R & 86
L
The clock may run fast/slow or may be reset after a power failure, or the power is left o for a long time. Set the correct time.
R & 115
EN
Try the following solutions in order from the top.
EN
R & 144
LV
LT
ET
R & 147
R & 146
R & 145
To Next Page
Loading...
Need help?
General
