94
Send Settings Quality, Contrast, 2-Sided Faxing *¹, Size on
Glass, Set As New Default
Speed Dial Setup Create, Edit, Delete
Group Dial Setup Create, Edit, Delete
Receive Settings Paper Source to Print *¹, Paper Size to
Print *¹ *², Auto Reduction *³, Fax Output,
Last Transmission Report *⁴
Communication DRD *⁵, ECM *⁶, V.34 *⁷, Rings to Answer *⁸,
Dial Tone Detection *⁹, Dial Mode *¹⁰
Check Fax Connection
Header Fax Header, Your Phone Number
Send Fax Later O, On
Broadcast Fax
R & 79
Polling
R & 91
Fax Report Fax Log *¹¹, Last Transmission *¹², Speed
Dial List, Group Dial List, Reprint Faxes *¹³,
Protocol Trace *¹⁴
Maintenance
R & 119
*1 Depending on the model, this function may not be available.
R & 12
*2 If you select a paper size larger than A4, you can receive faxes
only in B&W.
*3 If a received fax is larger than the selected paper size,
indicates whether or not to reduce the received fax to the
selected paper size or print the received fax at its original size
on multiple sheets.
*4 Indicates whether or not to print a report for the previous
transmitted fax. Select On Error to print reports only when
an error occurs. Select On Send to print reports for every fax.
*5 Indicates the type of answer ring pattern you want to use to
receive faxes. To select an option other than All (or O), you
must set up your phone system to use dierent ring patterns.
This option may be On or O depending on the region.
*6 Indicates whether or not to use Error Correction mode to
automatically correct fax data sent/received with errors due
to the line or any other problems. Color faxes cannot be
sent/received when ECM is o.
*7 Indicates the speed at which you transmit and receive faxes.
On is 33.6 kbps and O is 14.4 kbps.
*8 Depending on the region, this setting may not be displayed.
*9 When this is set to
On, the product starts dialing after it
detects a dial tone. It may not be able to detect a dial tone
when a PBX (Private Branch Exchange) or a TA (Terminal
Adapter) is connected. In that case, set to O. However,
doing so may drop the rst digit of a fax number and send
the fax to the wrong number.
*10 Indicates the type of phone system to which this product is
connected. Depending on the region, this menu may not be
displayed.
*11 Prints or displays the communication log.
*12 Prints a communication log for the previous transmission or
the previous polling results received.
*13 Reprints from the latest fax received. When the memory is
full, the oldest faxes are erased rst.
*14 Prints the protocol for the latest communication.
EN
Fax Mode Menu List
Faksa režīma izvēļņu
saraksts
Fakso režimo meniu
sąrašas
Faksirežiimi
menüüloend
EN
R & 94
x Fax Menu
Menu items and values may dier depending on the region.
LV
LT
ET
R & 97
R & 96
R & 95
To Next Page
Loading...
Need help?
General
