Epson WF-C20590 - Unpacking the Bridge Unit; Minimum Workers

WF-C20590 Installation Guide
Unpacking 13
Unpacking the Bridge Unit
 Items needed
 Phillips screwdriver
 Flathead screwdriver
 Minimum workers
 3 people
UNPACKING PROCEDURE
1. Pull up on the end of each plastic band to remove them.
Be sure to check the following notes before unpacking:
 All workers must read the unpacking procedure together
before starting work.
 Wear easy-to-move clothing, gloves, and safety shoes.
 Work with care to avoid injuries.
 Work with sufficient working space.
 Never work with less than 3 people.
 Use proper lifting techniques, and stop working
immediately if you feel that the load is too bulky or heavy.
x2
Plastic bands
PRELIMINARY