Epson WF-C20590 - Finisher Unit Included Items (Optional); Unpacking the Finisher Unit

WF-C20590 Installation Guide
Unpacking 18
Finisher Unit Included Items (Optional) Unpacking the Finisher Unit
 Items needed
 Phillips screwdriver
 Flathead screwdriver
 Minimum workers
 2 people
No. Included items Quantity
1 Main tray 1
2 Sub paper ejection tray 1
3 Grounding plate 1
4 Staple cartridge 1
5 Cable cover 1
6 Bridge unit joint plate 1
7 S-tite screw M 4×8 1
8 Machine screw M 4×10 2
1 2 3
4 5 6
7 8
Be sure to check the following notes before unpacking:
 All workers must read the unpacking procedure together
before starting work.
 Wear easy-to-move clothing, gloves, and safety shoes.
 Work with care to avoid injuries.
 Work with sufficient working space.
 Never work with less than 2 people.
 Use proper lifting techniques, and stop working
immediately if you feel that the load is too bulky or heavy.
PRELIMINARY