Epson WF-C20590 Installation Guide

WF-C20590 Installation Guide
Installing the Optional Units 44
Installing the Finisher Unit
 Minimum workers
 1 person
 Items needed
 Phillips screwdriver
 Flathead screwdriver
 Joint parts (included in the Bridge Unit box)
Finisher Unit left side
Cushion Sponge (305 mm)
Cushion Sponge (415 mm)
Make sure the Cushion
Sponges are aligned.
Be sure to check the following notes before the installation:
 All workers must read the installation procedure together
before starting work.
 Wear easy-to-move clothing, gloves, and safety shoes.
 Work with care to avoid injuries.
 Work with sufficient working space.
 Never attempt to install the product alone.
 Use proper lifting techniques, and stop working
immediately if you feel that the load is too bulky or heavy.
PRELIMINARY

Epson WF-C20590 Specifications

General

Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
ADF Capacity	150 sheets
Monthly Duty Cycle	Up to 400, 000 pages
Category	All in One Printer
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Print Technology	PrecisionCore
Print Speed	Up to 100 ppm (black/color)
Print Resolution	600 x 2400 dpi
Scanner Type	Color flatbed/ADF
Scan Resolution	600 dpi
Ink Cartridges	Black, Cyan, Magenta, Yellow
Display	9-inch touchscreen