CE35
Model CE100H3 CE70H3 CE50H3 CE40H3 CE40MR3 CE35
Tube Capacity 6″ 4″ 3″ 2½″ 2½″ 2″
Pipe Capacity 4″ Sch 40 3″ Sch 40 2½″ Sch 40 2″ Sch 40 2″ Sch 40 1½″ Sch 40
Angle Iron 4″ 3″ 2⅜″ 2″ 2″ 1½″
Power Requirement 220/440V 220/440V 220/440V 220/440V 220/440V 220V 1ph
Shaft Speed “RPM” 6 8 9 10 10 6-12
Drive Motors 3 3 1 1 1 1
Motor Brake Yes Yes No No No No
Inverter Drive NA NA NA NA NA Yes
Center Roll Positioning Hydraulic Hydraulic Hydraulic Hydraulic Manual Manual
NC Programming Touch pad Touch pad Touch pad Touch pad No No
Number of Programs 8 8 8 8 NA NA
Angle Twist Correctors Standard** Standard** Optional Optional Optional Optional
Angle Rolls – Section Benders
CE100
CE70
Pipe & Tube Notchers
Model EN180 EN100
Maximum Pipe Capacity 4″ 2½″
Maximum Tube Capacity 4½″ 3″
Angle Range 0-60º 0-60º
Power Requirement 220/440V 3ph
Belt Size 7″ x 79″ 4″ x 76¾″
Dust Extraction Powered Conventional
Grinding Wheel Capacity 7″ x 5½″ 4″ x 5½″
Note: • All capacities based on mild steel with machine in “Low bending speed”; heavy wall and
high tensile materials reduce machine capacity • Consult factory for production applications and
machine duty cycles.
“ 40 Years Excellence in Quality, Support and Service ”“ 40 Years Excellence in Quality, Support and Service ”
• Universal tooling set included • Vertical or horizontal positioning
• Patented by Ercolina
®
simultaneous downfeed and roll movement minimizes deformation
CE40
CE50
To Previous Page
Loading...