Beware of Imitations
SB48
Note: *220V 1 phase model available. Consult CML USA Inc. Ercolina with application questions • All capacities based on mild grade materials; heavy wall and high tensile materials reduce
machine capacity • Machines ordered voltage specific • Consult factory for production applications and machine duty cycles .
TB100
TB130
“ 40 Years Excellence in Quality, Support and Service ”“ 40 Years Excellence in Quality, Support and Service ”
Ercolina
®
DEMO VIDEOS
www.ercolina-usa.com
Non-mandrel Rotary Draw Benders
• Rotary draw benders to 5″ pipe capacity
• Manual 3 Axis Control • Material springback compensation
• User friendly programmable controls
• All machines and tooling in “Stock”
• Sample bends upon request
Model TB180 TB130 TB100 030 Mega Bender TB60 050 Classic 050KD SB48 MB42B Medi Bender 070
Tube Capacity 6″ - .120 wall 5″ 4″ 3″ 2½″ 2½″ 2½″ 2″ 1½″ 1¼″ – .065 wall
Pipe Capacity 6″ Sch. 10 4″ Sch. 40 3″ Sch. 40 2½″ Sch. 10 2″ Sch. 40 2″ Sch. 40 2″ Sch. 40 1½″ Sch. 40 1″ Sch. 40 1″ Sch. 10
Square Tube Capacity 4″ 4″ 3½″ 2″ 2″ 2″ 2″ 1½″ 1¼″ ¾″
Maximum “CLR” 39¼″ 27½″ 17″ 15″ 15″ 11⅞″ 11⅞″ 8⅞″ 7½″ 6⅞″
Degree of Bend 0-210° 0-210° 0-210° 0-210° 0-210° 0-210° 0-210° 0-210° 0-210° 0-210º
Bending Speed “RPM” Variable to 1 Variable to .75 Variable to 1.3 Variable .6 to 2.2 1.7 or 3.4 1.0 or 2.0 1.2 2 2 2.2
NC Programming Touch Screen Touch Screen Touch Screen Touchpad Touchpad Touch Pad LED Touchpad Touchpad LED
Number of Programs Unlimited with USB Unlimited with USB Unlimited with USB 30 30 30 1 30 30 1
Voltage
440V/3ph 220V or 440V/3ph 220V or 440V/3ph *220V or 440V/3ph 220V or 440V/3ph 220V or 440V/3ph 220V or 440V/3ph 120V or 220V/3ph 120V 120V
050
Classic
TB60
050KD
MB42B
Medi Bender 070
030 Mega Bender
Mandrel Upgrade
Available
TB180
Mandrel Models Available
TM76
Tube, Pipe and Profile Benders
To Next Page
Loading...