LIP-8008E User Guide
28
‘*’ not as 1
st
digit—Dial Pulse to Tone Switchover,
the system will switch from pulse to tone dialing.
When entering a Speed Dial, a 16 character name may
be associated with the number for Dial by Name.
To place a call using Station Speed Dial:
• Lift the handset,
• Press SPEED,
• Dial the desired Station Speed Dial bin number (00-19 or 000-
099 or 000-049).
To enter a Station Speed Dial number with CO Line and Name:
• Press TRANS/PGM,
• Press SPEED,
• Dial the desired Station Speed Dial bin number,
• Select/dial the CO/IP line/group, (Skip this step in iPECS SBG-
1000)
• Dial the desired number to be stored,
• Press HOLD/SAVE,
• Enter the associated name, if desired,
• Press HOLD/SAVE.
To Next Page
Loading...
