Setting Up the Internet and Message Programs 76
Note! If the location you use does not correspond to any of the pre-defined
locations, you can create a new one easily using the New command on the
Location page and follow the instructions as for the Edit command in step 3
below.
3. On the Location page, select Edit to alter any of the settings relating to
your Current location.
• On the Location page, if required, you can change the name of the
Current Location or enter a new location in the Name line.
• On the Location page, select Fixed line or Mobile. If you select
Mobile, go directly to step 5 below. If Fixed line is selected, select your
current country and enter your area code.
• On the Dial out page (Fixed line only), enter any prefixes you need to
get an outside line.
• On the Chargecard page (Fixed line only), tap the Use a chargecard
box and tap the Options button if you want to use a chargecard from
your selected Current location. Select Edit
,
or New if the list of pre-
defined chargecards does not contain one compatible with your own.
Enter your account details on the Details page and the order in which
information should be sent on the Rules page.
• Use the Dial settings page (Fixed line only) to indicate whether you
use tone or pulse dialling, and whether you need to wait for dial or
proceed tones while dialling out.
4. On the Tone dialling page (Fixed line only) you can:
• set the Tone time (1/32 sec);
• set the Delay time (1/32 sec);
• set the Pause time for (,) (1/32 sec);
• enter a Sample number; and
• tap Dial to perform Test tone dialling.
5. On the Country page, select your current country.
For more information on each of the settings, tap the Help button on the
appropriate page of the dialog.
Specifying your Internet service provider
Once you have set up your modem and the location you dial from, you need to
enter a few details about the Internet service that you use to connect to the
Internet.
To specify your internet service provider:
1. Open the Internet section of the Control panel on the Desktop screen.
2. Tap in the Current Internet service box or press Tab to see the list of pre-
defined service providers. Select the service provider you use.
Note! If your service provider does not appear in the list, you can add a new
one using the New button. For more information on this, see “…add a new
Internet service?” in the “How Do I...? Mobile And General Usage” section
later on.
3. Tap the Edit button and:
To Next Page
Loading...