77 Setting Up the Internet and Message Programs
• On the Service page: enter the access number you use in the Standard
dial-up number line. Including the country and area codes. (You may
need to omit the first 0 from the area code.)
• On the Account page: remove the tick from the Manual login box and
enter the username and password for your Internet account, confirming
your password.
4. Select Done, then OK.
Note! If the Internet service provider you are using requires you to specify
your IP address or the DNS addresses, or requires you to log on using a 7 bit
setting for data transfer, you can change these settings on the Addresses and
Login pages of this dialog. For more details, use the Help button on the
dialog pages, and see the articles in the “How Do I...? Mobile And General
Usage” section later on.
Note! If your service provider requires you to perform a text-based or script-
based login, you will need to use a script. The pre-defined Internet services
come with scripts already set up. If you are creating a new Internet service
and need to create a new script, see the appendix on scripting in the MC 218
Reference information available on Ericsson’s Mobile Internet site.
Entering your e-mail and fax settings in the Message program
The final stage of the setting up process is entering your e-mail and fax details
in the Message program.
To start the Message program:
• Tap on the Message program icon.
To enter the e-mail settings:
1. On the Tools menu, select Add new account Email.
2. Enter the following on the Account page of the dialog:
• Account name: The name for the new account.
• Your name: This will appear on all e-mails you send.
• Email address: This is the e-mail address that will appear on all
e-mails you send, and should be the e-mail address you want others to
send e-mails to.
• Mailbox type: If the dialog has a Mailbox type line, select the type of
e-mail account you use. (Most e-mail accounts are POP3, but you can
also use IMAP4.)
• Set as default account: Tick this box if you plan to use multiple mail
accounts, but generally want new messages to be created and sent
using the details from this account. (It is still possible to change the
account used for sending individual messages on a message-by-
message basis.)
3. Enter the following on the Outgoing page of the dialog:
• Email (SMTP) server: This is the server through which outgoing
e-mail will be sent.
• Auto send on opening: Remove the tick from this box if you do not
want e-mail in your outbox to be automatically sent when you connect
to your mail account.
To Next Page
Loading...