Setting Up the Internet and Message Programs 78
4. Enter the following on the Incoming page of the dialog:
• POP3 (or IMAP4) server: This is the server used to receive e-mail
messages.
• Mailbox login: This is the mailbox login name provided by your
Internet service provider.
• Mailbox password: This is the password you need to use to access your
Remote mailbox.
• Confirm password: Enter your password again for confirmation.
Tip! You will receive the above information when you open an account with a
service provider.
Advanced e-mail settings
Occasionally, your email account will require you to specify details such as
the port numbers or settings for MIME encoding. If you are not sure whether
you need to do this, you should just leave the Advanced email settings as they
are.
The Advanced settings allows you to:
• Specify your SMTP or POP3 (or IMAP4) port number, or
• Turn off MIME encoding of messages, or
• Specify that your MC 218 should use Secure password authentication.
To change the advanced e-mail settings:
• Tap the Advanced
button in the New Email account dialog.
Entering fax settings
To enter the fax settings:
1. On the Tools menu, select Account settings Fax.
2. On the Details page enter the:
• Fax number: This is normally the number of the fax machine on which
you want to receive faxes, either your own private machine, or one
which you have access to, for example, the fax machine in your office,
or the number of the phone your MC 218 is connected to. This number
will be printed on the top of faxes you send.
Note! You can only enter ‘+’, space, and digits ‘0’-‘9’ in the Fax ID line.
• Your name: Enter the name which you want to be printed at the top of
the faxes you send.
• Preferred resolution: is normally set to fine. This is the resolution you
will send faxes in and would prefer to receive faxes in. Change this to
normal if you want to reduce the size of the fax, or if the fax machine
you are sending to can only receive normal faxes.
• Show connection dialog: Remove the tick from this box if you do not
want to display the Connection dialog each time you send a fax.
3. On the Modem page enter the:
• Max. fax speed: If you have problems when sending or receiving faxes
because of a poor quality phone connection you can lower this value.
To Next Page
Loading...