Message 96
Note! If you do not want messages to be sent automatically when a connection
is established, select Account settings and then the name of your account on
the Tools menu, and remove the tick from the Auto send on opening box on the
Outgoing page.
The progress bar shows the state of the connection, and when the e-mails have
been sent, a dialog shows the number of messages sent and the number that
could not be sent. E-mails that were successfully sent are moved to the Sent
folder; messages that could not be sent remain in the Outbox and are displayed
in italics.
Note! You can cancel the message transfer part way through by selecting Stop
on the File menu.
Note! You should delete messages you no longer require from the Sent folder,
to avoid running out of memory on your machine.
Tip! When sending you can still continue to do other work, e.g. prepare other
messages.
Connecting and receiving e-mail
In order to receive your e-mail you need to open your remote mailbox.
Opening your mailbox allows you to view a list of the messages waiting for
you and choose which ones you want to download to your MC 218.
To connect and receive your e-mail:
1. Ensure that your MC 218 is connected to your Ericsson infrared modem
phone (or fixed line modem and phone line).
2. Tap Open mailbox on the toolbar, or select Open on the Transfer menu
and select the name of the mailbox you want to open.
3. If you are not connected to your network you will see the Connect to
Internet dialog, showing details of the connection to be made. Make sure
these settings are correct and select OK.
The progress bar in the title bar indicates the current status of the
connection.
A summary of all the messages contained in your remote mailbox is
displayed, not just the messages received since the last time you connected
to your Internet account. New messages are shown in bold.
4. To select the messages you want to move or copy to your Local inbox:
To Next Page
Loading...