95 Message
To re-open a draft e-mail:
• Highlight the message in the Draft folder and tap on it or press Enter.
To reject changes to a message:
• On the File menu, select Cancel, lose changes.
To move a draft message into the Outbox when it is ready to be sent:
• If the message is open in the editor, select Done (save to outbox) on the
File menu, or tap the Save to outbox button on the toolbar. You are asked
whether you want to remove the message from the Draft folder. Click Yes
to move the message to the Outbox, or No to move the message to the
Outbox and keep a copy in the Draft folder as well.
• In the Folder view, open the Draft folder and highlight the message you
want to move. On the Transfer menu, select
Move to outbox. The
message is moved, not copied, to the Outbox folder.
Note! If you have a message editor open in the Message program when you
use a ‘mailto:’ link on a web page, any message you were working on will be
saved in the Draft folder. See the “Sending Mail from a Web Page” section of
the “Internet” chapter of this User Manual for more information.
Connecting and sending e-mail
When you are ready to connect and send mail make sure all the messages you
want to send are in the Outbox folder.
Tip! If you have more than one Internet account, enter the settings for each
account in the Internet section of the Control panel, then when you want to
send e-mail enter the settings for the e-mail account you want to use by
selecting Add new account Email on the Tools menu.
To connect and send your e-mail:
1. Move to the Outbox folder and select the Send from outbox command on
the Transfer menu, or tap the Send button on the toolbar.
2. Select All
to send all the messages in the Outbox, Selected
to send just the
highlighted messages, or Email to send all the e-mails in the Outbox. If
you have many different types of messages in the Outbox, including fax
and SMS messages, selecting All will result in a number of connections
being made.
Note! You should ensure that your MC 218 is connected to your Ericsson
infrared modem phone.
3. If you are not connected to your network you will see the Connect to
Internet dialog, showing details of the connection to be made. Make sure
these settings are correct and select OK. The connection will be set up and
the messages sent.
If you are already connected, or you deselected the Show connection
dialog box when setting up the Internet Control panel you will not see the
Connect to Internet dialog.
To Next Page
Loading...