MINI-LINK BAS 6-22
Technical Description EN/LZB 111 0542 P2B
6.6.4 Equipment Errors and Error Handling
On all boards, the equipment application handles the software and
hardware supervisioning.
Apart from this software based supervision, the hardware processor
has a watchdog as well, in orderd that if the software supervision
process does not update the watchdog circuitry, a processor restart is
initiated, cold restart.
6.6.5 Equipment Audit
At a hot start, the equipment is checked, trying to avoid traffic
disturbance as much as possible, while a hardware self-test is
performed at board restart and cold restart. At hot restart, the
equipment configuration is also checked and updated.
To Next Page
Loading...
