MINI-LINK BAS 9-8
Technical Description EN/LZB 111 0542 P2B
9.2.2 Events
The events that are not defined as alarms don’t have category or
severity. When updating the event and alarm management window (by
opening the event and alarm application) the events are logged in the
event log.
Name Description
alarmDisturbance It is sent if alarm state changes frequently.
boardReplaced It is sent when the insertion of a circuit board
that matches the configured data for the slot,
but not the serial number, has been detected.
cbrQueue Full temporary buffer overflow.
selfTestFailedOnModem Loop on modem does not work at RN side,
that is, MAC or modem faulty.
selfTestFailedOnRadio Loop on radio does not work at RN side, that
is, radio is faulty, MAC and modem are
working correctly.
selfTestOk Loop on radio is working at RN side, that is,
MAC, modem and radio have no faults.
signOnComplete It is a notification that the sign on of an AT is
completed.
softwareDownloadDone It is sent when the software is downloaded.
softwareDownloadInPro
gress
Sent when the board software is being
downloaded.
subrackCreated It is sent when a new subrack has been
created.
subrackDeleted It is sent when a new subrack has been
removed.
systemAudit It is generated by the CP to notify that a CP
starts or restart is ongoing.
systemNodeCreated It is sent when a new SN is created.
systemNodeDeleted It is sent when a new SN deleted.
systemUp It is sent when the CP has initialised.
To Next Page
Loading...
Need help?
General
