EasyManua.ls Logo

Ericsson MINI-LINK BAS - Pdu

Ericsson MINI-LINK BAS
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8-15 MINI-LINK BAS
EN/LZB 111 0542 P2B Technical Description
8.5.2 CP
The CP consists of a CPU board, an hard disk, -48 V POU and an
ATM adapter board(s). The CPU offers functionality similar to a
Sparc Station.
The CP shelf dimensions are 176x450x270 mm, HxWxD.
ETH1 ETH2 SERIAL 1 SERIAL 2 ALARM ext.HD
POWER
ON/OFF
FUSE
POWER INPUT
TX RX
ATM Adapter
Figure 8-11 CP Shelf-Front View.
8.6 PDU
The PDU is an optional unit required if “high Ohmic” –48 V
distribution is not available. The PDU branches one incoming –48 V
distribution cable into 5 or 10 outgoing cables and converts a possibly
“low Ohmic” electrical interface in to a “high Ohmic” interface.
Each output is protected by a 10A automatic circuit breaker.
Figure 8-12 5 Outputs PDU Version

Table of Contents

Related product manuals