ESAB ESP-101 - System and Optional Accessories

20
SECTION 2 DESCRIPTION
2.6 System and Optional Accessories
Remote Junction Box .............................................................................................. 0558004887
The Remote Junction Box provides a means to extend the total length of the PT-37 Torch. When
used in combination with 50 ft., 75 ft., or 100 ft. extension cables, and any standard length of PT-
37 Plasma Torch from 4.5 ft. to 50 ft., a maximum torch length of 150 feet can be achieved.
TUA2 Auto-Transformer .........................................................................................0459145880
Converts an input voltage of 208, 230, 400, 475, 500, or 575 V to 460 V for use with an ESP-101
460 V console.
Torch Holder Assembly ...................................................................................p/n 0558005926
Gas Flow Measuring Kit ................................p/n 19765 ("CE" units - 0558000739)
Valuable troubleshooting tool allows measurement of the actual air ow through the torch.
Remote Hand Switch with 25 ft. (7.6 m) lead .......................................... p/n 0558005548
with 50 ft. (15.2 m) lead ....................................... p/n 0558005549
Enables non-automated mechanized cutting using the PT-37 or PT-38 torch. Connects to the
CNC interface receptacle on the rear panel.
CNC Cable 25 ft. (7.6 m) ...................................................................................p/n 0558008833
50 ft. (15.2 m) ................................................................................p/n 0558008834
Connects between the CNC interface receptacle on the rear panel and the CNC.
Extension Cable 50 ft. (15.2 m) ......................................................................................p/n 0558004888
75 ft. (22.9 m) ..................................................................................... p/n 0558009266
100 ft. (30.5 m) ...................................................................................p/n 0558004889
Plate Rider ..............................................................................................................p/n 0560936972
Used to maintain a constant stando while cutting thin materials or using machines without
automatic height control.