55
NOTE:
Schematics and Wiring Diagrams on 279.4mm x 431.8mm
(11” x 17”) paper are included inside the back cover of this manual.
SECTION 7 REPLACEMENT PARTS
7.1 General
Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on
the unit nameplate.
To ensure proper operation, it is recommended that only genuine ESAB parts and products be used with this
equipment. The use of non-ESAB parts may void your warranty.
Replacement parts may be ordered from your ESAB Distributor.
Be sure to indicate any special shipping instructions when ordering replacement parts.
Refer to the Communications Guide located on the back page of this manual for a list of customer service phone
numbers.
7.2 Ordering
Bill of material items that have blank part numbers are provided for customer information only.
Hardware items should be available through local sources.
Note
7.0 Replacement Parts
Model # P/N DESCRIPTION SCHEMATIC DIAGRAM WIRING DIAGRAM
1 0558004880 ESP-101 460v 0558006578 0558004831
2 0558005215 ESP-101 380-400v CE 0558006606 0558006607
To Next Page
Loading...
