Chapter 5: Pre-Election Day Tasks 64
EVS5200_DOC_SOP_DS850
Software Version 2.10
Published: February 26, 2014
2. From the Election menu, press
Setup to access the Setup
screen.
3. On the Setup screen, press
Load Election. This displays the
Searching for Election Definition
Media Device pop-up screen.
4. Insert a valid (for the election)
Election Definition Media
Device flash drive into one of
the scanner’s USB ports. The
previous pop-up screen is
temporarily replaced by a
Detecting inserted device
pop-up screen. Then, the
Election Code screen appears.
5. Enter the Election Code and
then press Accept.
Reference: See Using USB Media Devices for instructions.
To Next Page
Loading...