Eshine YS-K01 - Page 17

SuZhou Eshine Elevator Components Co., Ltd. Chapter 3 Operation Instructions
YS-K01 Door Controller User Manual ―13―
Reset 70W asynchronous motor parameters
After set P0.01=11, except the fault parameter value, the parameter value of P0.00
－
P8.14 will
be reset to the default parameter. At reset default parameter, the panel displays as Figure 3-9.
Figure 3-9 Reset 70W asynchronous motor parameters
Reset 80W asynchronous motor parameters
After set P0.01=12, except the fault parameter value, the parameter value of P0.00
－
P8.14 will
be reset to the default parameter. At reset default parameter, the panel displays as Figure 3-10.
Figure 3-10 Reset 80W asynchronous motor parameters
Reset 150W asynchronous motor parameters
After set P0.01=13, except the fault parameter value, the parameter value of P0.00
－
P8.14 will
be reset to the default parameter. At reset default parameter, the panel displays as Figure 3-11.
Figure 3-11 Reset 150W asynchronous motor parameters
Clear fault information
After set P0.01=4, the fault information of P9.00
－
P9.06 will be cleared which will be reset to the
default parameter. At clear fault information, the panel displays as Figure 3-12.
Figure 3-12 Clear fault information
Hz
A V
RUN
Hz
A V
RUN
ENTER
Hz
A V
RUN
ENTER
Hz
A V
RUN
Hz
A V
RUN
ENTER
Hz
A V
RUN
ENTER
Hz
A V
RUN
Hz
A V
RUN
ENTER
Hz
A V
RUN
ENTER
Hz
A V
RUN
Hz
A V
RUN
ENTER
Hz
A V
RUN
ENTER