Esser FACP 8000C - Trouble and CPU Failure Status

Fire Alarm Computer 8000C
Page 17
3.3 Trouble
The common display TROUBLE (yellow LED) lights and the control panel buzzer sounds
intermittently.
♦
At least one control panel function is out of order!
♦
A plaintext is shown in the display describing the malfunction message/cause.
♦
The yellow LED of the zone in which the malfunction has possibly occurred blinks on the single
zone indicator units (optional).
!
Detector zones/relay loops or inputs/outputs will not signal an alarm in the case of an
event. Inform customer/maintenance service!
3.4 CPU failure
The fire alarm control panel is only partially operative!
♦
No plaintext display of messages.
♦
No evaluation of information.
♦
No activating of external equipment.
♦
The master box and the Master box (MB) LED and Notify fire department will be activated
even in the control panel CPU failure mode.
!
A comprehensive functioning of the fire alarm control panel is no longer provided. Call
customer/maintenance service immediately!
Operating status of the fire alarm control panel