Esser FACP 8000C - Detector Zone Management; Detector Zone Operations

Page 26
Fire Alarm Computer 8000C
4.3 Detector zones
4.3.1 Switching on / resetting a detector zone
With switch-on/reset, a detector zone which has been switched off -incl. all fire alarms- is switched
into the operative status or an operative detector zone is reset and any imminent messages such
as Fire or Trouble are deleted.
Press Key
On
Zone
4
Fig. 16: Switching on / resetting a detector zone 4 (example)
Escape
Function
Time fct. Time/Date
Time
Date
Delay on
: 10:4
: Tu. 02.06.99
: --:-- off: --:--
Fig. 17: Display switching on zone 4
Detector zones