Fire Alarm Computer 8000C
Page 71
9 Configuration of the FACP 8000C with customer data editor
The control panel configuration of the FACP 8000C is programmed with customer data editor
8000C in the customer data of the fire alarm control panel.
The programmed control panel configuration must match the actual configuration of the control
panel, i.e., number and slot of extension cards and micromodules.
With control panels that have been installed and programmed, the control panel configuration may
be retrieved from the customer data memory of the fire alarm control panel for service purposes
using the service PC and displayed on the PC screen.
It is also possible to print out fire alarm control panel programming on a printer. Using the
customer data editor, you may employ a filter function to select whether to print all or only specific
data, such as the control panel configuration or the data record for a specific analog ring loop.
Programming the fire alarm control panel is described in ESSER publication Customer Data Editor
8000C (Part-No. 798097).
When connecting the service PC, the cover contact must be open to ensure that
connection of the PC will be detected by the FACP.
Configuration
To Next Page
Loading...