Esser FACP 8000C - Status of a Control

Page 34
Fire Alarm Computer 8000C
4.5.3 Status of a control
With this function, the current status, e.g.
Normal, Activated, Disconnection
or
Trouble
of the
corresponding control can be queried directly.
Press Key
Status query
Relay
2
Fig. 33: Status Relay 2 (example)
Fig. 34: Display status Relay 2
Relays may be set to
inverse
by means of customer data programming of the 8000C FACP. In this
case, the relays will be activated in the normal state of the FACP and deactivated in case of the
associated event.
In normal operation of the 8000C FACP, relays programmed for
inverse
activation are indicated as
'active'.
Controls
End
Operation Relay : 0002
Status query: 0001 message