User’s Manual
2 ECM-3610/3610L User’s Manual
2.2 System Specifications
General Functions
• CPU: Onboard VIA Eden ESP6000 677MHz Low-power CPU
(Optional ESP5000/4000)
• BIOS: Award 256KB Flash BIOS
• Chipset: VIA VT8606 / VT82C686B
• I/O Chipset: VIA VT82C686B
• Memory: Onboard one 144-pin SODIMM socket supports up to 512Mbytes
SDRAM
• Enhanced IDE: Supports two IDE devices. Supports Ultra DMA/100 mode with
data transfer rate up to 100MB/sec.
• FDD Interface: Supports up to two floppy disk drives, 5.25" (360KB and 1.2MB)
and/or 3.5" (720KB, 1.44MB, and 2.88MB)
• Parallel Port: Internal header for bi-directional parallel port x 1. Supports SPP,
ECP, and EPP modes
• Serial Port: One external DB-9 connector supports RS-232 x 1, one internal
header supports RS-232/422/485 x 1. Ports can be configured as COM1, COM2,
COM3, COM4, or disabled individually. (16C550 equivalent)
• IR Interface: Supports one IrDA Tx/Rx header
• KB/Mouse Connector: External mini-DIN PS2 Keyboard/Mouse connector x 1
• USB Connectors: One 5 x 2 header onboard supports dual USB ports
• Watchdog Timer: Can generate a system reset, IRQ10/11, or NMI. Software
selectable time-out interval (2 sec. ~ 255 sec., 1 sec./step)
• Power Management: Supports ATX power supply. Supports PC97, LAN wake up
and modem ring-in functions. I/O peripheral devices support power saving and
doze/standby/suspend modes. APM 1.2 compliant.
To Next Page
Loading...